Cop y – Canon DIRECT PRINT CDI-E350-020 User Manual

Page 61

Trim the image.

Changing the Size of the Trimming Frame
• Press the up and down buttons to adjust the size of the

trimming frame.

• The trimming frame can be changed to a minimum selection

of approximately half the displayed image (in width and
height) or a maximum selection that is virtually the same size
as the image.

• Expanding the trimming frame beyond its maximum size

cancels the trimming setting.

• When printing an image that has been magnified using the

trimming option, the image quality may become coarser and
grainier depending on the level of magnification. If this
happens, the trimming frame displays in red.

Rotating the Trimming Frame
• You can rotate the trimming frame using the left and right

buttons.

Moving the Trimming Frame
• Press the FUNC./SET button and use the up, down, right

and left buttons to move the trimming frame. Pressing the
FUNC./SET button again allows you to change the size of
the frame and to rotate it.

Press the MENU button,

select [OK] and press the

FUNC./SET button.

Selecting [Cancel setting] cancels
the selected trimming setting. If
[Edit] is selected, the display
returns to the previous screen.

When screen

displays

COP