StarTech.com SAT2510U3S - Manual (Page 4)

Instruction Manual
1
Introduction
The SAT2510U3REM/SAT2510U3S Removable 2.5” SATA HDD Backup System/Mobile
Rack for 3.5”/5.25” Front Bay turns a 2.5” SATA HDD/SSD drive into a removable hard
drive that can also be used externally as a normal USB 3.0 enclosure. The 2.5” SATA
removable hard drive bay can be mounted into any computer’s 3.5” or 5.25” front bay
to provide a hot-swap capable mobile rack. Drives can be easily installed and removed
from the computer system without having to open the computer case every time. This
can be used to create backups that can then be removed for safe keeping/archiving.
When outside of the drive bay, the enclosure can be used as a standard external USB
3.0 hard drive with up to 5 Gbps of data transfer bandwidth (10x more than USB
2.0). This makes the removable 2.5” hard drive bay an excellent accessory for people
working with very large files and need to take them on the road. Backed by a StarTech.
com 2-year warranty and free lifetime technical support.
Packaging Contents
SAT2510U3REM
• 1x 2.5” SATA enclosure
• 1x 3.5” Front Panel Drive Bay
• 1x 3.5” to 5.25” Front Bay Adapter Bracket
• 1x 15-pin SATA power to 4-pin SP4 small floppy power Adapter Cable
• 1x 4-pin LP4 Molex power to 4-pin SP4 small floppy power Adapter Cable
• 1x SATA Cable
• 1x USB 3.0 A to Micro-B Cable
• 1x Screw Kit
• 1x Instruction Manual
SAT2510U3S
• 1x 2.5” SATA Enclosure for SAT2510U3REM
• 1x USB 3.0 A to Micro-B Cable
• 1x Screw Kit
System Requirements
• Computer chassis with available 5.25” or 3.5” front bay
• Available internal SATA port on motherboard or SATA controller card
• Available SP4 Floppy or LP4 Molex or SATA power connector from power supply
• External Use: Available USB port (USB 3.0 recommended)