StarTech.com SV565UTPUL User Manual

Page 16

Instruction Manual

Beep Codes
Some of the keyboard command sequences you issue to the Remote Unit have

multiple possible settings. The Unit will beep to indicate what setting you have

selected for the command you issued. (A short beep followed by a long beep indicates

an invalid command.)

[Ctrl] - [Ctrl] - [Alt]+[E] (Compatibility Mode)

1 beep: disabled

2 beeps: enabled

Note: Commands described in the [Key] - [Key] format are keys that must be pressed

in order on the keyboard. Commands described in the [Key]+[Key] format must be

pressed simultaneously.
Note: If the Num Lock, Caps Lock, and Scroll Lock lights are flashing in unison on the

keyboard, the other Unit has control of Computer A. You will not be able to use A until

the other Unit releases access to that computer.

Standard Command

With Compatibility

Mode Enabled

Description

[Ctrl] - [Ctrl] - [2]

[Ctrl] - [Ctrl] - [E] - [2]

Switches control to Computer A

(input allowed only if the Host

Unit is in Remote or

Auto mode)

[Ctrl] - [Ctrl] - [F2]

[Ctrl] - [Ctrl] - [E] - [F2]

Toggles console control

between Computer A and

Computer B

[Ctrl] - [Ctrl] - [F11]

[Ctrl] - [Ctrl] - [E] - [F11]

Video Calibration Entrance See