StarTech.com SV565UTPUL - Manual (Page 14)

Instruction Manual
11
Beep Codes
Some of the keyboard command sequences you issue to the Host Unit have multiple possible
settings. The unit will beep to indicate what setting you have selected for the command you
issued. (A short beep followed by a long beep indicates an invalid command.)
[Ctrl] - [Ctrl] - [Alt]+[E] (Compatibility Mode)
1 beep: disabled
2 beeps: enabled
[Ctrl] - [Ctrl] - [F3] (Inactivity Interval for Auto Mode)
1 beep: 5 seconds
2 beeps: 15 seconds
3 beeps: 30 seconds
4 beeps: 60 seconds
NOTE: Commands described in the [Key] - [Key] format are keys that must be pressed in
order on the keyboard. Commands described in the [Key]+[Key] format must be
pressed simultaneously.
NOTE: If the Num Lock, Caps Lock, and Scroll Lock lights are flashing in unison on the
keyboard, the other Unit has control of Computer A. You will not be able to use the computer
or issue commands until the other unit has finished using the computer.
As EDID display information is not passed through the extender to the computer, manually
setting the maximum display resolution on the extender may be necessary for content to
display correctly on the connected monitors.
4-Digit Code Resolution 4-Digit Code Resolution
1007 1024x768 1612 1600x1200
1208 1280x800 1610 1680x1050
1210 1280x1024 1910 1920x1080
1307 1360x768 1912 1920x1440
1409 1440x900 1914 1920x1440
1410 1440x1050 2011 2048x1152
1609 1600x900