StarTech.com SV231HDMIUA - Manual (Page 9)

Instruction Manual
6
Manual Scan allows users to manually switch back and forth between powered-on computers.
Left + Left +
To select the previous or the next computer, press or arrow keys. To
abort the Manual Scan, press any other key.
Scan Time
Four options are available for users to set the Scan Time duration, it Includes 3, 8, 15
and 30 seconds.
Note: Scan Time is set to 3 seconds by default.
To adjust Scan Rate, set the scan time of duration before switching to the next computer:
Left + Left +
The KVM Switch generates 1 to 4 beeps indicating a scan time duration for 3, 8, 15 or
30 seconds respectively.
Audio Lock
There are two options for Audio Lock: ON and OFF. When ON, audio selection follows
computer selection. When OFF, the current port’s audio is used for all other ports. It
is useful if you want to listen to a particular computer’s audio signal while operating
other computers.
Left + Left +
The KVM switch beeps once or twice corresponding to ON and OFF respectively.
To change which port the audio is following to the currently selected port, press the
following hotkey:
Left + Left +