StarTech.com CPNT410IR - Manual (Page 4)

Instruction Manual
1
Introduction
StarTech.com’s 4-Port Component Video Switch lets you switch between up to four A/V
devices as well as the corresponding audio signals, eliminating the need to swap out
cables to make use of multiple audio/video devices.
A versatile solution for home theatre applications requiring digital or analog audio
connections with the use of standard and HD component devices, the 4-port
Component Video switch supports display resolutions ranging from 480i to 1080i,
providing the signal quality necessary to bring out the best results from your input
devices.
A convenient, time-saving A/V solution, the Component Video switch can be installed
in minutes and offers a remote learning feature that allows you to use existing device
remotes to toggle between inputs, in addition to the IR remote control that is included
with the Component switcher.
This attractive, compact unit can be installed in minutes, and is backed by a 2-year
warranty as well as free lifetime technical support.
Packaging Contents
• 1x Component/Audio Switcher
• 1x 9V DC Power Adapter
• 1x Remote Control
• 1x Instruction manual
System Requirements
• A display that has at least one set of inputs that accommodate RCA audio or Digital
Coax audio and component video
• A set of cables for each device to be connected to the switch that use RCA audio or
Digital Coax audio and component video
• A set of cables to connect the switch to the display, using RCA audio or Digital Coax
audio and component video
NOTE: If you are using Digital Coax to connect a device to the switch, Digital Coax
will be required between the switch and the display in order for the selected
component to properly output an audio signal. Similarly, if you are using RCA
audio to connect between a component and the switch, RCA audio must be used
between the switch and the display.