StarTech.com VS440HDMI - Manual (Page 7)

Instruction Manual
4
How to Use
Front Panel
OUT 1~4: Selects the numbered Output Port to be configured. An output must be
selected before selecting an input.
IN 1~4: Selects the numbered Input Port to map to an Output Port. Should only be
used after an Output Port has been selected first, otherwise an error message will be
generated on the LCD status display.
ALL: Selects all of the Output ports at once. Used to configure all output ports
simultaneously with the same setting.
STO: Stores/saves the current Input/Output display relationships to internal memory.
EDID: Switches between “FIX” and “TV1” modes. FIX uses an internal EDID profile that
supports up to 1080p and sends it to each input device. TV1, uses the EDID from the
display connected to Output port 1 and sends it to each input device. Useful if the
connected display devices have different capabilities than the built in EDID that you
wish to use (i.e. different display resolutions).
OFF: Turns off the selected Output port. No video will be sent to the selected display(s).
RCL: Recalls/loads the stored display relationships from the “STO” button.