StarTech.com VID2DVIDTV - Manual (Page 4)

Instruction Manual 1
Introduction
Thank you for purchasing a StarTech.com video scaler. This device is designed to convert the
output from a video source (DVD, video game console, VCR) and scale it for output to high-
definition displays--including plasma TVs and LCD monitors--while maintaining the clarity of
the image.
Features
• Get the most out of your existing video equipment by maximizing its performance on a
high-definition display.
• Easy to use interface gets you up and running in minutes.
• Supports common video input standards, including NTSC and PAL.
• Adaptive digital comb filter, high-speed algorithms, and vertical temporal filter combine to
provide crystal-clear output with virtually no de-interlacing artifacts.
• Choose between two models depending on your display: VGA (VID2VGATV) or
DVI (VID2DVIDTV).
Before You Begin
Package Contents
• 1 x Video Scaler Unit (VGA Output: VID2VGATV DVI Output: VID2DVIDTV)
• 1 x RCA Video Cable
• 1 x YCbCr RCA to 8-pin DIN converter
• 1 x HD-15 male/male VGA cable (VID2VGATV only)
• 1 x HD-15 male to YPbPr 3-prong RCA cable (VID2VGATV only)
• 1 x DVI-D male/male DVI cable (VID2DVIDTV only)
• 1 x AC Power Adapter
• 1 x User Manual
Site Preparation
Ensure you have the necessary cables to connect your video source (such as a DVD player) to the
video scaler. Note that if you have previously used the device with a standard television, you can
most likely use those cables to connect the item to the video scaler. The video scaler should be
in close proximity to the video source and be connected using high-quality cables for the best
possible results.
Need more cables? Contact your dealer or visit www.startech.com for more information.