StarTech.com SVID2USB2NS - Manual (Page 5)

Instruction Manual
2
Installation
USB 2.0 connector: Connect to USB 2.0 port of your computer
S-Video input: S-Video input from external A/V device (e.g. VCR)
Composite video input: Composite video input from external A/V Device (e.g. VCR)
* If you want capture audio, please connect audio directly to Line-in of your Sound card.
USB 2. 0
connector
Composite
input
S-Video
input
Driver Installation
Note: Do not connect SVID2USB2NS adapter to computer USB port before driver
installation!
Note: Please make sure your computer has USB2.0 port correctly installed and
functioning !! ( Please update your Windows® XP to at least SP2, or Windows® 2000 to
SP4, and updating the USB 2.0 host controller drivers before installation to make sure
the computer’s USB 2.0 is functioning correctly)
1. Please insert “Multimedia Installation Kit” CD-ROM into your CDROM drive; AutoRun
will play; (if AutoRun does not run, please go to “My Computer” and double click the
CD-ROM drive).
2. From the menu, please select the “GrabBeeX-light” product.
3. Please select “Device Driver” on the next screen.
* Note: In Vista, windows will get a pop up dialogue box. Choose “Allow” to continue
the installation.
4. Click “Next”.
5. Complete Setup Wizard.
6. Click “Finish”, then please restart the computer.