StarTech.com IPUSB2VGAUE - Manual (Page 10)

Instruction Manual
7
Installation for Mac OS X
1. Insert the Driver CD (included) into the CD/DVD-ROM drive.
2. Browse through the Driver CD and locate the “DisplayLink-OSX” .dmg file. Double-
click on this file to begin the installation process:
3. Double Click the “DisplayLink Software
Installer.pkg” to install the software.
4. Once the installation is complete, click
the “Restart” button. The computer will
automatically reboot, so make sure to
close/save any files you have opened,
before pressing this button.
5. After the computer has
restarted, plug in the VGA Video
Adapter to an available USB 2.0 port. The
adapter should now be ready to use.
6. If you wish to add additional VGA Video Adapters, simply plug them into available
USB 2.0 ports. A maximum total of 4 VGA Video Adapters can be used on a
computer. Note that only one audio device can be used by Mac OS at a time. So
audio will only be output to one of the VGA Video Adapters.
OPTIONAL: Connect any USB peripherals to be shared along with the VGA Video
Adapter, into the available USB hub ports on the unit. They will appear as directly
connected to the computer system.