StarTech.com ST121WHD - Manual (Page 8)

Instruction Manual
5
2. Please Activate Registration on Transmitter Unit will now appear
on the display. Physically return to the transmitter unit hold down the
reset button on the transmitter for 3 seconds to activate registration.
3. The additional transmitter is now registered. This action can be performed for up to
2 additional transmitters for a total of 3.
Remove Video Transmitters (Must have multiple transmitting units)
1. Using the IR remote control, Press MENU - > Select Remove Video Source
2. Move the cursor and select the desired transmitter to be remove
Modify Video Source Name
To more easily distinguish between added transmitters, the generic hardware name,
given during the “Add additional Video Transmitter Sources” steps, can be modified.
1. Using the IR remote control, Press MENU - > Select Modify Video Source Name
2. Using the cursor select a name that better suits specific transmitter.