StarTech.com ST121WHDST User Manual
Page 9
Instruction Manual
6
Add Additional Video Transmitter Sources (Must have multiple
transmitting units)
By default the ST121WHDST’s transmitter and receiver units are paired together. If you
have more than one transmitter, this device you can add additional transmitters to
switch between sources.
1. Using the IR remote control, press MENU - > Select Add new Video Source
2. Please Activate Registration on Transmitter Unit will now appear on the display.
Physically return to the transmitter unit hold down the reset button on the
transmitter for 3 seconds to activate registration.
3. The additional transmitter is now registered. This action can be performed for up to
2 additional transmitters for a total of 3.
Remove add Video Transmitters (Must have multiple transmitting units)
4. Using the IR remote control, Press MENU - > Select Remove Video Source
5. Move the cursor and select the desired transmitter to be remove
Modify Video Source Name
To more easily distinguish between added transmitters, the generic hardware name,
given during the “Add additional Video Transmitter Sources” steps, can be modified.
1. Using the remote control, Press MENU - > Select Modify Video Source Name
2. Using the cursor select a name that better suits specific transmitter.