Source Audio Soundblox Pro Bass Envelope Filter - Manual (Page 16)

16 | Preset Saving
PRESET SAVING
An edited preset can be saved by pressing and holding a footswitch as
described in the Controls: Footswitches section. But keep in mind that
an edited preset can be saved to any one of the
6 preset locations.
For example if preset 1 has been selected and edited, it can be saved
to preset location 3 by pressing and holding the 3/6 footswitch. Once the
preset has been saved to that location, the new location will be the
selected preset.
Presets can be copied across preset banks by holding the PRESET BANK
button while pressing and holding a footswitch. For example, if preset
2 has been selected and edited, holding the PRESET BANK button while
pressing and holding footswitch 2/5 will save the current settings to loca-
tion 5 . Once the preset is saved to another bank, the preset in the current
bank will stay selected and NOT be saved to its own location since it was
saved elsewhere as a new preset.
17
02
03
04
05
06
07
08
09
10 11 12
13
14
15
16
18
19
21
20
01
EQ ONLY
2 POLE LOW PASS
4 POLE LOW PASS
SINGLE PEAK
TRIPLE PEAK
PEAK & NOTCH
PHASERS
62 125 250 500 1K
(XD) (XC) (OE) (VA) (Q) (EL) (LS)
2K 4K
+12
-12
0
< >
MOD
SOURCE
TAP TEMPO
ENABLE
PRESET BANK
4-6 1-3
(HOLD)
CALIBRATE
BACKPAGE
MODE
ENVELOPE
LFO
HOT HAND
USER
00 22
SWEEP RANGE SPEED
FREQUENCY MIX
FAST FAST
SLOW SLOW
WET
DRY
WET
DECAY
X-AXIS
ATTACK
& DECAY
Y-AXIS
HOT
HAND
LFO
MIN MIN
DOWN UP
MAX MAX
BASS ENVELOPE FILTER
1 4
2 5
3
(TAP TEMPO)
6
B
A