Soundmatters SUBstageWall Bracket User Manual

Upper bracket lower bracket

4”

16.0”

Upper Bracket

Lower Bracket

Rubber Bushing

Note: When mounted, the bottom edge of the

SUBstage will be about 1-5/16” below the bottom

edge of the lower bracket.

SUBstage 250/100
Wall-Mount Screw Hole Template
for SSWB1 Mounting Bracket Kit

Note: When mounted, the top edge of the SUBstage will be

about 9/16” above the top edge of the upper bracket.

IMPORTANT WARNING:

This bracket assembly MUST be

screwed solidly into wooden studs. Use this bracket ONLY if

you can screw into wooden studs.

WARNING:

Make sure all pictures/etc. are well secured to

the wall as they may vibrate loose and rattle.
Pro Tuning Tip: Listen and tweak the settings for crossover,

volume and phase BEFORE final wall-mounting. Use the foam

end caps from the packaging to temporarily wedge the unit

into approximate position behind a chair

or sofa. Note, once unit is wall-mounted,

it will have to be UN-mounted to change

these settings

soundmatters international

tel: 775 981.1460

fax: 775 981.1465