Sonics VC5040AT - Manual (Page 6)

SECTION II – OPERATION
FUNCTIONS OF CONTROLS, INDICATORS, AND CONNECTORS
FRONT PANEL
Power ON/OFF switch
When depressed switches the power ON or OFF.
Illuminates when power is on.
AMPLITUDE control
When rotated controls the amplitude of vibration at the
probe tip. Ten revolutions enables fine amplitude
adjustment.
ULTRASONICS indicator Lights when the ultrasonics is energized.
REAR PANEL
BNC connector Connects to the converter.
Footswitch jack Connects to the footswitch or remote actuation cable.
Power supply jack Connects to the 24 volt power supply.
6