Solvline USB Multiport - Manual (Page 54)

54
Driver Setup Windows
2. This page allows configuration of the basic device parameters (i.e. Baud rate, data bits,
parity, stop bits and flow control). To access more advanced settings, click on the
"Advanced…" button to display the advanced properties page (shown below).
3. This page will allow the following parameters to be altered:
 COM port number
 USB buffer sizes
 Latency timer
 Alter this to correct compatibility problems for obsolete applications.
 Read and write timeout values
 You can alter this for timing of timeout event if there are no more Tx/Rx data.
 Miscellaneous options
 Serial Emulator: The function of the serial enumerator is to detect a Plug-and-Play
enabled device (such as a serial mouse or serial modem) that is attached to the USB
serial port.
 Serial Printer: If enabled, serial printer will disable timeouts to allow for long delays
associated with paper loading.
 Cancel If Power Off: The Cancel If Power Off option can be used to assist with
problems encountered when going into a hibernate or suspend condition. This will
cancel any requests received by the driver when going into hibernate or suspend.
 Event on Surprise Removal