Solvline USB Multiport - Manual (Page 44)

44
Driver Installation Windows Vista/2008
Installing Window Vista/2008 Device Driver
1. Run Windows Vista/2008
2. Connect USB MultiP ort to your PC‟s USB port.
3. Insert media CD(provided with MultiPort) into the CD drive
4. Click “Locate and install driver software (recommended)” on the “Found New Hardware”
window.
5. Step 4 will automatically install drivers in the CD. USB <-> Serial Cable will automatically be
installed.
6. Following picture depicts Device Manager after carrying out step 4. As can be seen, all
“USB Serial Converters” are successfully installed. The number of lines may vary depending
on the product you are using.