SIG SAUER CP1 Prismatic Scope - Manual

CP1 PRISMATIC SCOPE
CP1 PRISMATIC SCOPE
CONTENTS
OWNER’S MANUAL
The CP1 Prismatic Scope is a lightweight solution for fast target acquisition.
This rugged and reliable scope provides assured accuracy from a 3X fixed
magnification reticle, graduated to 600 meters. It features three reticle
modes – non-illuminated black, illuminated green and illuminated red, with
each illuminated mode offering 5 brightness settings. Anodized aluminum
construction ensures optimal performance in the most extreme conditions.
• 3 reticle modes – non-illuminated black, illuminated green and red.
• 5 brightness settings for each illuminated mode (green and red)
• 3X fixed magnification ranging reticle
• Windage & elevation adjustments
• Anti-reflect & multilayer band pass optical coating
• M1913/Weaver rail mount
1. CP1 Prismatic Scope 2. Owner’s Manual 3. 3V CR2032 Lithium Battery
FEATURES
CP1 PRISMATIC SCOPE
INSTRUCTIONS
• Unscrew battery cover, using coin, then thumb/forefinger
• Position battery + facing out
• Reattach battery cover, tighten completely to o-ring
To mount on M1913/Weaver accessory rail:
• Loosen locking bolt using coin or screwdriver
• Mount on rail, and secure by tightening locking bolt
• CP1 is in non-illuminated mode, with the rotary switch set to 0. Switch to
illuminated green or red brightness settings 1 – 5 by rotating switch left or
right. Settings are colored green or red to correspond with reticle pattern
color.
• Adjust windage and elevation by removing turret covers and using coin or
screwdriver – counterclockwise: move impact left/up – clockwise: move
impact right/down.
1 click = 1/4”@100 yds. Secure covers once set.
AnOdIzed
ALUMInUM CASe
eLeVATIOn AdjUSTMenT
TURReT
3X fIXed MAgnIfICATIOn
RAngIng ReTICLe
M1913/WeAVeR
MOUnT
WIndAge
AdjUSTMenT
TURReT
3V CR2032 LIThIUM
BATTeRy 8000 hOURS
TyPICAL LIfe
AnTI-RefLeCT &
MULTI-LAyeR BAnd
PASS COATIng
ROTARy On/Off Of
ILLUMInATed gReen
And Red ReTICLe
MOdeS.