beautypg.com

SIG SAUER STL-900L Tactical Light/Laser User Manual

SIG SAUER Hardware

background image

STL-900 TacTicaL LighT & LaSer

OWNER’S MANUAL

Red Laser

on/off Button

White

Cree LED

Elevation and Windage

Adjustment

Steady-Momentary

on/off Buttons

STL-900 TACTICAL LIGHT & LASER

The Tactical Light & Laser is a compact, lightweight solution for providing pistols and
rifles with a high powered beam (steady or disorienting strobe light), incorporating a
pinpoint red laser adjustable for windage and elevation. This tiny powerhouse packs
a genuine 130 lumen* CREE LED in a quick mount design.

FEATURES

n

Momentary, constant on, and strobe (laser is independent)

n

Convenient side access battery compartment

n

Self-storing Allen key for windage & elevation adjustment

n

Easy rail attachment

n

(1) 3V CR123A lithium battery

CONTENTS

n

STL-900 Tactical Light & Laser

n

Owner’s Manual

n

(1) 3V CR123A Lithium Battery

n

Allen Key

INSTRUCTIONS

Install battery:

n

Unscrew battery hatch

n

Position battery + facing forward

n

Close hatch, tighten screw

Note: This product features digital power
management. When battery power drops
below a preset level, the unit shuts
down to protect the internal circuitry
and prevent a battery overheating
condition. If this occurs, the battery needs
replacement.
Mounting on firearm:

n

Loosen locking shaft.

n

Position right rail of light on gun rail,

and roll light into place, with locking
shaft resting in notch of gun rail.

n

Tighten locking shaft securely.

Getting Started:

n

Select steady or strobe modes using

side button.

n

Steady/Strobe light mode button

Red Laser

Strobe mode

Button

IMPORTANT

n

Light must be ON to select or change

modes.

n

Last selected mode is retained until

changed.

n

Laser functions independently of either

light mode. Press red side
button to turn on/off.

n

Laser mode

n

For momentary operation of selected

light
mode, partially depress and hold left or
right button on rear. For steady operation,
fully press and release left or right button
on rear.

n

To adjust laser windage or elevation,

adjust screws with coin or screwdriver.
Clockwise moves dot left/down; counter-
clockwise moves dot right/up.

Note: Align the laser to point parallel with
the bore of the gun, providing consistent
offset targeting, regardless of range.

Tactical Gear Redefined

TM