SIG SAUER SHR 970 - Manual (Page 19)

19
SIGARMS ™ SHR 970, Parts List
1. Barrel
2. Receiver
3. Filler Screws (4)
4. Barrel Clamping Nuts (2)
5. Bolt Release Pin
6. Bolt Release/Stop
7. Bolt Release Spring
8. Extractor Plunger
9. Ejector
10. Ejector/Extractor
Springs (2)
11. Ejector Pin
12. Extractor
13. Bolt Body
14. Firing Pin
15. Firing Pin Spring
16. Bushing/Spring Seat
17. Firing Pin Cross Pin
18. Cocking Piece
19. Bolt Sleeve
20. Trigger Assembly
21. Trigger Pin
22. Trigger Housing Screw
23. Rear Bedding Block
24. Front Bedding Block
25. Barrel Locating Pin
26. Barrel Clamping
Screws (2)
27. Stock
28. Q.D. Swivel Studs (2)
29. Magazine Ejector
Springs (2)
30. Magazine Support
Bracket
31. Trigger Guard
32. Guard Screws (2)
33. Retaining Clips (2)
34. Magazine Release
Spring
35. Magazine Release Pin
36. Support Retaining Pin
37. Magazine Release
38. Magazine Follower
39. Magazine Spring
40. Magazine Box
41. Butt Plate
42. Butt Plate Screws (2)
18
This instruction manual should always accompany this rifle and be trans-
ferred with it upon change of ownership.
SIGARMS ™ CANNOT BE RESPONSIBLE FOR
THE FUNCTIONING AND SAFETY OF
ANY FIREARM WHICH HAS BEEN ALTERED
OR CHANGED FROM THE ORIGINAL
FACTORY SPECIFICATIONS.
Warranty Statement
Based on the Magnuson-Moss Warranty Act, SIGARMS ™ offers no express warran-
ty on their product line. However, SIGARMS recognizes its obligations concerning
service to owners of SIGARMS products.
SIGARMS stands behind its products and will continue to provide service to its
product line as they have over the years. SIGARMS products will be serviced
for a period of one year from the date of retail purchase, for defects in materials
or workmanship, at no charge to the purchaser. This warranty is void if the
firearm has been abused, altered, misused, damaged by accident, fired with
improperly loaded ammunition or with an obstruction in the barrels, or
damaged by failure to provide reasonable and necessary maintenance. This
warranty does not apply to normal wear of any parts, including metal,
wood, plastic, rubber and other material’s surface finish if unauthorized
repair and alteration has been performed. Be sure to retain your sales slip
as proof of purchase date when making a claim.
If you have questions concerning the performance or servicing of your rifle,
please, call or write directly to:
SIG Arms Inc.
Attention: Service Department
Corporate Park
Exeter, NH 03833
(603) 772-2302
No. Description No. Description No. Description