SIG SAUER SIG556 - Manual (Page 36)

36 www.sigsauer.com
Ammunition
1. Use only high quality, original, factory-manufactured ammunition. Do not use cartridges that are dirty, wet, corroded,
bent, or damaged. Do not oil cartridges. Do not spray aerosol-type lubricants, preservative, or cleaners directly onto
cartridges or where excess spray may flow into contact with cartridges. Lubricant or other foreign matter on cartridges
can cause potentially dangerous ammunition malfunctions. Use only ammunition of the caliber for which your firearm is
chambered. The proper caliber is permanently engraved on your firearm; never attempt to use ammunition of any other
caliber.
2. The use of reloaded, “remanufactured” hand-loaded, or other non-standard ammunition voids all warranties. Reloading
is a science and improperly loaded ammunition can be extremely dangerous. Severe damage to the firearm and serious
injury to the shooter or to others may result. Always use ammunition that complies with the industry performance
standards established by the Sporting Arms and Ammunition Manufacturers’ Institute, Inc. of the United States (SAAMI) or
ammunition manufactured to military specifications.
WARNING – AMMUNITION (CARTRIDGE) NOTICE
SIG SAUER Inc. SPECIFICALLY DISCLAIMS RESPONSIBILITY FOR ANY DAMAGE OR
INJURY WHATSOEVER OCCURRING IN CONNECTION WITH, OR AS A RESULT OF, THE USE IN ANY SIG SAUER
FIREARM OF FAULTY, NON-STANDARD, “REMANUFACTURED” HAND LOADED (RELOADED) AMMUNITION, OR
CARTRIDGES OTHER THAN THOSE FOR WHICH THE FIREARM WAS ORIGINALLY CHAMBERED.
12SIG599_SIG556MiniManual1511980Rev02.indd 36 9/12/12 12:40 PM