Clarion DXZ535 - Manual (Page 17)

DXZ535
21
English
CD/MD changer functions
When an optional CD/MD changer is connected
through the CeNET cable, this unit controls all
CD/MD changer functions. This unit can control
a total of 2 changers.
Press the [FNC] button and select the CD(MD)
changer mode to start play. If 2 CD(MD) chang-
ers are connected, press the [FNC] button to se-
lect the CD(MD) changer for play.
∗ If “NO MAG” appears in the display, insert the maga-
zine into the CD changer. “DISC CHK” appears in
the display while the player loads (checks) the
magazine.
∗ If “NO DISC” appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
∗ If “NO DISC” appears in the display, load MDs into
the MD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
Switching disc titles and track titles
(MD)
This unit can display disc titles and track titles
already entered on MDs.
∗ Titles cannot be entered for MDs with this unit.
1. Press [D] button to display the title. The disc
title or track title is displayed.
2. Each time you press and hold the [D] button
for 1 second or longer, the display toggles
between the disc title and the track title.
Note:
• If an MD is not input its disc title or a track title,
“NO TITLE” appears in the display.
Procedure to scroll a title
Set “SCROLL” to “ON” or “OFF”.
(The factory default setting is “ON”. Refer to the
subsection “Turning the screen saver function
on or off” in section “Operation common to
each mode”.)
●When set to “ON”
The title is automatically kept scrolling.
●When set to “OFF”
Press the [T] button to scroll the title.
Selecting a CD
[DN] or [UP] button correspond to a disc load in
the magazine.
Press the [DN] or [UP] button to select the
desired disc.
∗ If a CD is not loaded in a slot of magazine, “NO
DISC” appears in the display.
CD/MD Changer Operations
8. OPERATIONS OF ACCESSORIES
CAUTION
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
Pausing play
1. Press the [ ] button to pause play.
“PAUSE” appears in the display.
2. To resume play, press the [ ] button again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
●When connected to CDC655z or CDC1255z.
Press the [D] button to display the title.
●When connected to CDC655Tz
1. Press the [D] button to display the title.
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
User title (disc)
➜ CD-tect title (disc) ➜ Artist
title
➜ CD-text title (track) ➜ User title
(disc)…