Shellab SWBR27-2 - Manual (Page 5)

Reciprocating Water Bath 5
RECEIVING YOUR UNIT
Before leaving our factory, all units are packaged in high quality shipping materials designed to provide
protection from transportation related damage.
Once a unit leaves our factory, however, safe delivery becomes the responsibility of the carrier who is
liable for loss or damage to your unit. Damage sustained during transit is not covered under your unit
warranty.
When you receive your unit, inspect it for concealed loss or damage to its interior and exterior. Should you
find any damage to the unit, follow the carrier’s procedure for claiming damage or loss.
Inspection Guidelines
Carefully inspect the shipping carton for damage. If the carton is damaged, report the damage to the
carrier service that delivered the unit.
If the carton is not damaged, open the carton and remove its contents. Verify that all of the following
equipment is included in the crate:

One (1) Bathcover

Two (2) Thermometer Clips

One (1) Manual

One (1) Shaker Basket
Carefully check all packaging before discarding. Save the shipping carton until you are sure everything is
in order.
Returning Shipment
If you must return the unit for any reason, first contact your service representative for authorization. You
will be asked to provide the data plate information. See Recording Data Plate Information.
Recording Data Plate Information
Once you have determined the unit is free from damage, locate the data plate at the back of the unit. The
data plate ind
icates your unit’s model number and serial number. Record this information below for future
reference.
Table 1. Data Plate Information
Model Number
Serial Number
Part Number
Voltage
Section
2