Shellab SGO3-2 - Manual (Page 3)

3
RECEIVING AND INSPECTION
Your satisfaction and safety require a complete understanding of this unit. Read
the instructions thoroughly and be sure that all users are given adequate training
before attempting to use this unit. Note: This equipment must be used only for its
intended purpose; any alterations or modifications will void your warranty.
1.1 Inspection: The carrier, when accepting shipment, also accepts responsibility for
safe delivery and is liable for loss or damage claims. On delivery inspect for visible
exterior damage, note and describe on the freight bill any damage found and enter
your claim on the form supplied by the carrier.
1.2 Inspect for concealed loss or damage on the unit itself, both interior and exterior. If
any, the carrier will arrange for official inspection to substantiate your claim.
1.3 Accessories: Verify that your accessory package is complete. All units should
have a set of four (4) Leveling feet, two (2) shelves and eight (8) shelf clips.
1.4 Return Shipment: Save the shipping crate until you are sure all is well. If for any
reason you must return the unit, contact your customer service representative for
authorization and supply data plate information. Make sure to include the model
and unit serial number. The service representatives will furnish you with a return
authorization number and address for return. Note: Make sure this return
authorization number appears on the unit packaging and shipping papers. Units
returned without proper authorization may not be accepted at the factory. For
information on where to contact Customer Service please see the manual cover.
Section
1