Seville Classics UHD20204B - Manual (Page 8)

Step 1.
Step 2.
Step 3.
Step 4.
Remove 2pcs Slides to create the
space needed to use the Screwdriver
(#21).
Install the removed 2pcs slides back to the Left
Panel (#4).
Remove 2pcs Slides to create the space needed to
use the screwdriver (#21). Then, attach the Left
Panel (#4) to the Front Frame (#6) and the Solid
Hardwood Top (#1). Make sure the “Top” of the
Left Panel (#4) is on the Solid Hardwood Top (#1)
and the screw holes are lined up to the Front Frame
(#6). Use Screwdriver (#21) and 6pcs Screw A (#14)
to tighten the Left Panel (#4) to the Front Frame
(#6), and then to Solid Hardwood Top (#1).
UltraHD Rolling Cabinet (Model No. 20204)
(pg 7 of 13)
Open the package, remove and place all parts to
the side. Then open the package of the Solid
HardwoodTop (#1).
Note: The Solid Hardwood Top is packed within an
inner cardboard box.
Install Front Frame (#6)
Install the Left Panel (#4)
Locate the Front Frame (#6)and attach to the
"Front" of the Solid Hardwood Top (#1), using 3pcs
Screw A (#14) and Screwdriver (#21) to tighten.
Note: The screw holes have some tolerance so
make sure that the top and sides of the Front
Frame are flushed with the Solid Hardwood Top –
this may save time by avoiding having to make
slight adjustments later.
Front
Back
Front
Back
先用螺丝刀（#21）将上图所示的2PCS
滑轨拆下后在进行组装.
Front
Back
Front
Back