Sceptre X420BV-F120 - Manual (Page 19)

- 19 -
www.SCEPTRE.com
SCEPTRE X420 HDTV User Manual
Connecting DVD player with S-Video…
1. Make sure the power of X420 LCD HDTV and your DVD player is turned off.
2. Obtain an S-Video Cable. Connect the S-Video connector to both your DVD player and
AV’s S-Video connector port on the left side of your X420 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player
and AV’s white connector port on the left side of your X420 LCD HDTV.
4. Connect the red color connector to both your DVD player and AV’s red connector port on
the left side of your X420 LCD HDTV.
5. Turn on the X420 LCD HDTV and your DVD player.
6. Use the remote control’s source button or the source button on the TV to switch to S-
Video.
Please Note :

Make sure the yellow connector in the same group is not connected. You
can only connect either the S-Video port or the Yellow Video connector port.
DO NOT CONNECT BOTH.

Please reference the DVD player’s manual as well, to make sure the DVD
player is configured to output correctly to the TV.