Sceptre X420BV-F120 - Manual (Page 18)

- 18 -
www.SCEPTRE.com
SCEPTRE X420 HDTV User Manual
3. Turn on X420 LCD HDTV.
4. Follow the first time on screen instructions.
Please Note :

Not all broadcasts are in High Definition (HD). Please refer to your local
broadcasting stations for more information.

The X420 LCD HDTV’s tuner is designed for HDTV therefore requires a
stronger signal than normal TVs. If you cannot achieve that signal level with
your antenna or cable, your X420 LCD HDTV might lose picture or sound.
Connecting DVD Player with Component YPbPr…
1. Make sure the power of X420 LCD HDTV and your DVD player is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your DVD player
and YPbPr’s green connector port on the back of your X420 LCD HDTV.
3. Connect the blue color connector to both your DVD player and YPbPr’s blue connector
port on the back of your X420 LCD HDTV.
4. Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your X420 LCD HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player
and YPbPr’s white connector port on the back of your X420 LCD HDTV.
6. Connect the red color connecto r to both your DVD player and YPbPr’s red connector
port on the back of your X420 LCD HDTV.
7. Turn on the X420 LCD HDTV and your DVD player.
8. Use the remote control’s source button or the source button on the TV to switch to
YPbPr.
Please Note :

Please ref erence the DVD player’s manual as well, to make sure the DVD
player is configured to output correctly to the TV.