SAVV AVH-DDM101P - Manual (Page 8)

8
Exit Pair
After pair successfully, if you want to
disconnect, press and hold button to
disconnect Bluetooth ® connection.
— — — — — — — — — — — — — — — — — — — —
Make a call (After Paired)
1. In any mode, Press button.
2. Rotate the knob to select DIAL NUML,
Press the knob to confirm the selection.
3. Rotate and press the knob to select phone
number.
- Press [ ] button to delete a digit
inputted.
- Press button to reset entered number.
4. Press to dial out.
5. While a call is in progress, Rotate the knob
to adjust call volume.
6. Press button to hang up.
7. In the BT mode, press and hold button to
initiate a redial of last number called.
Receive
1. After pair successfully, if there is a call
incoming, the unit switch to BT mode
automatically.
2. Press button to receive.
3. Press
button to hang up.
Bluetooth ® Operation
Note:
For your safety, avoid talking on the phone as
much as possible while driving.
Bluetooth ® is a wireless transmission way
for short distance. The built-in Bluetooth ®
can connect with the mobile phones having
Bluetooth ® function.
After connecting, you can control your mobile
phone through the unit.
— — — — — — — — — — — — — — — — — — — —
Pairing
Pairing
Use this function to establish a connection
between the Dash Dock radio and your
Bluetooth ® device.
1. Turn the Dash Dock radio on.
2. Turn on Bluetooth ® function on your
Bluetooth ® accessory (ie. smart phone,
Tablet, etc.) and start scanning for new
Bluetooth ® devices.
3. Press the [SCR] button on the Dash
Dock unit the display shows either BT
Disconnected or BT Music.
4. Press and hold the [SCR] button until
display changes to ‘Pairing”.
5. From the Bluetooth ® accessory select
‘inCarBite’ from the list.
6. When prompted for passcode enter 1234
and the Bluetooth ® Pairing will occur. If
your device instructs you to connect or
disconnect please select connect.
Call Transfer
During talking, press button to transfer audio
from the unit to your mobile phone.
Note:
Some mobile phones will transfer audio from
the unit to themselves once the incoming call
is answered.
— — — — — — — — — — — — — — — — — — — —
BT Audio
To listen to audio from a bluetooth ® device and
control playback with the unit.
1. Press [ SRC ] button repeatedly until BT
MUSIC is displayed.
2. To play or pause, press [ 1 ] .
3. Press the [ ] button to move the to
beginning of the previous track. Press the
[ ] button to move to the beginning of
the next track.
4. Press and hold the [ 1 ] button to stop
playback.