Santec 9550KT-TM - Manual (Page 5)

0 5
9550KL, KR, KT _ _ H a n d l e
NOTE: Hot valve “Red” mounted to left side. Cold valve “Blue” to be
mounted on right side.
Remove the top lock nut and top lock nut washer from the valve body.
Apply a ring of silicone around the handle hole on top of the deck. Do
While tightening the valve body into place make sure to keep the
position of the valve body outlet pointed toward the tee connector.
Slip the valve body into the proper handle hole from underneath the
tub. Thread the top lock nut and top lock nut washer back onto the
valve body and tighten down securely.
From underneath, tighten the brass lock nut securely.
Rough Installation For Handle
T o p l o c k n u t w a s h e r
T o p l o c k n u t
R u b b e r w a s h e r
B r a s s l o c k n u t
V a l v e b o d y
V a l v e b o d y
o u t l e t