Ryvyr M-SHERRY-80MOL - Manual

TM
INSTALLATION INSTRUCTIONS
SHERRY
MIRROR
M-SHERRY-80OL
10.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you encounter
any installation problems, please don’t hesitate to contact us. Before you begin, please
observe all local building codes. Unpack the new product and inspect for damage. The
appearance of your mirror may differ from the illustrations in this guide. These instructions
still apply. Please ensure the finished wall is straight and plumb and the floor is flat and
perpendicular to the finished wall.
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver Level Drill Tape Measure Safety Glasses
10'
1
MIRROR INSTALLATION
2
Finished Wall
FINISHED WALL
FLOOR
1 5/8” [344mm]
width to center of clips
Set desired height for mirror