Ryvyr RES81MWT - Manual

SINK INSTALLATION
INSTALLATION INSTRUCTIONS
RESIN VANITY TOP
INTEGRATED MODELS
10.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
CAUTION! Risk of product damage. Do not use plumbers putty or oil-based sealers with
this vanity top. These products will stain surfaces permanently.
SUGGESTED TOOLS AND MATERIALS
Silicone Sealant Leveler Safety Glasses
VANITY TOP INSTALLATIONS
1. Install the cabinet / vanity according to the cabinet / vanity manufacturer
2. Check to make sure the vanity top sits level on top of the vanity
3. Apply silicone sealant to the top of cabinet / vanity as shown above
4. Install faucet and drain assembly per the manufacturers' instructions
** Sink style, shape, cutout on top, vanity may vary from the picture above. Instructional purposes only.
CARE AND CLEANING
Silicone Sealant
Apply bead of quality clear
silicon sealant evenly along the
top of the vanity.
For best results in caring for your glass top, we suggest:
• Always wipe off spills immediately
• Never use a strong / abrasive cleaner. Always test your cleaning solution on an unnoticeable area before applying it to the
entire surface.
• Wipe surfaces clean, immediately after applying cleaner.
• Do not allow the cleaner to sit or soak. Never let cleaners sit on the surface of the lavatory.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces,
they will scratch the lavatory surface.
• Always rinse and wipe clean the fixtures to prevent soap buildup.