Ryvyr CUM198RWT User Manual
Undermount sink
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver
Silicon Sealant
Tape Measure
Safety Glasses
1
PARTS / HARDWARE INCLUDED
500001
4x
11
1213
4x
11
1214
4x
SINK INSTALLATION
3
120003
4x
2
BEFORE YOU BEGIN
INSTALLATION INSTRUCTIONS
UNDERMOUNT SINK
All Models
CUM-XXXX
08.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
• Observe all local plumbing and building codes.
• Follow these instructions only if it applies to your installation.
• Before installation, carefully inspect it for damage. Return the vanity top to its packaging until you are ready to install it.
• These instructions contain important care and cleaning instructions. Please review these instructions carefully.
CAUTION! Risk of product damage. Do not use plumbers putty or oil-based sealers with
this vanity top. These products will stain surfaces permanently.
Apply a continuous bead of quality sealant to the
surface (rim) of the sink.
Turn the vanity upside down and place it on a clean,
scratch-resistant surface. Center the sink over the cutout.
Secure the sink to the top using the mounting kit / hardware provided.
**NOTE: Sink style, shape, and cutout on top may vary from the picture above. Instructional purposes only.