Ryvyr M-KROM-30WT User Manual
Krom
CARE AND CLEANING
• Clean the mirror and shelf using a soft, slightly damp cloth. Spray with a glass cleaner and wipe clean. Avoid using silicone
cleaners and waxes.
TM
INSTALLATION INSTRUCTIONS
KROM
MIRROR AND SHELF
M-KROM-30BK | WT
10.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you encounter
any installation problems, please don’t hesitate to contact us. Before you begin, please
observe all local building codes. Unpack the new product and inspect for damage. The
appearance of your mirror may differ from the illustrations in this guide. These instructions
still apply. Please ensure the finished wall is straight and plumb and the floor is flat and
perpendicular to the finished wall.
SUGGESTED TOOLS AND MATERIALS
MIRROR INSTALLATION
Flat Head Screwdriver
Phillips Screwdriver
Level
Drill
Tape Measure
Safety Glasses
10'
NOTE: Where possible, try to affix a stud or provide adequate wall support for the size and weight of the mirror. Mirror comes with
pre-attached brackets on the frame and a wall mount cleat. Affix the cleat to the wall in the desired location by pre-drilling the cleat
and then affixing the cleat using the proper fastening, based upon wall material.
1
2
Finished Wall