Casio CELVIANO AP45ES1C - Manual (Page 15)

E-13
Basic Operation
430A-E-015A
To layer two tones
NOTE
• To use the variation tone for the main tone and/or the
layer tone, perform the required operation to turn on the
variation tone(s) before starting the procedure below.
1
While holding down the tone button of the main
tone, press the tone button for the layer tone.
• This causes the indicator lamp of the main tone button
to light, and the lamp of the layer tone button to flash.
• Whether the normal tone or variation tone is selected
for the main tone and layer tone depends on the
normal tone/variation tone setting of the tone button
you press. The indicator lamp above the VARIATION
button is lit when the variation tone is selected for
the main tone.
2
Now try playing something on the keyboard.
• Note should sound using both of the tones you
selected.
3
To cancel layering, press any tone button.
NOTE
• If you change or turn off a digital effect while layering is
turned on, the setting you make is saved to the main
tone’s settings only.
• You cannot layer two tones that are assigned to the same
tone button (for example: ELEC PIANO 1 + ELEC PIANO
2, or HARPSICHORD + VIBRAPHONE).
Using Layer
With layer you can assign two different tones (a main tone
and a layered tone) to the keyboard, both of which play
whenever you press a key.
Main tone + Layered tone
How digital effects are applied when layering is turned
on
The following are the rules that determine what type of digital
effects are applied to two tones that are layered.
These conditions:
• Digital effects turned on
for the main tone
• Digital effects turned on
or off for the layered
tone
• Digital effects turned off
for the main tone
• Digital effects turned on
for the layered tone
• Digital effects turned off
for the main tone
• Digital effects turned off
for the layered tone
Cause these digital effects
to be applied to both the
main tone and layered tone:
Main tone digital effects
Layered tone digital effects
None