RED MATTE BOX CAGE & SIDE FLAGS - Manual (Page 8)

AUGUST 18, 2011
© 2011 RED.COM INC.
7
7. Install the four M2 x 8mm Flat Screws that attach the cage couplers between the top cage and side
cages using the T-6 Torx Driver and hand-tighten.
Figure 5: Attaching Cage Couplers to Top Cage
IMPORTANT: Tighten screws snug but DO NOT over-tighten to prevent damage to the threads or
screws.
8. Hand-tighten the M3 x 6mm Flat Screws securing the cage to the matte box.
9. Install the pinch ring assembly onto the matte box in the position noted during removal and tighten the
thumbscrews.
Figure 6: Installing Pinch Ring Assembly
10. Install the two filter tray lock screws onto the matte box.
Attach Cage
Couplers to
Top Cage