RED MATTE BOX CAGE & SIDE FLAGS - Manual (Page 7)

© 2011 RED.COM INC. AUGUST 18, 2011
6 6
5. Place the cage over the matte box.
Figure 4: Placing Cage on Matte Box
NOTE: When installing the cage, it will not fit flush with the mounting points on the matte box as
long as the matte box is sitting flat on the surface. You will need to raise, and if necessary, support
the matte box away from the surface.
6. Install the six M3 x 6mm Flat Screws securing the cage to the matte box loosely using the T-10 Torx
Driver.