Installing matte box cage – RED MATTE BOX CAGE & SIDE FLAGS User Manual
Page 5
© 2011 RED.COM INC.
AUGUST 18, 2011
4
4
INSTALLING MATTE BOX CAGE
1. Place matte box face-down on a flat surface.
Figure 1: Preparing Matte Box for Cage Installation
2. Remove the two filter tray lock screws (1) from the matte box by un-screwing to allow for proper
clearance during installation of the cage.
IMPORTANT: Note the locations when removing two filter tray lock screws and ensure they are in-
stalled in the same hole as removed. Each side has two possible mounting locations – one for the
front tray, one for the rear tray.
1
1