Ram Trucks 2014 ProMaster Commercial - Uconnect 5.0/5.0N Manual - Manual (Page 64)

Adding the First Waypoint to your Route
To add the first waypoint to your route, do the following:
1. Tap the screen to bring up the Main menu.
2. Tap Change route.
3. Tap Travel via.
NOTE: You can also use Voice control to add Way-
points.
4. Choose the location for your waypoint from a choice
of Home, Favorite, Address, Recent destination, POI,
longitude/latitude, or position of last stop.
On the route summary screen, a message confirms that
the route is being recalculated to include the way-
point. In the Change route menu, the Travel via button
changes to show that you now have one waypoint on
your current route.
NOTE: The maximum number of waypoints you can
add is three.
Adding further Waypoints to your Route
To add more waypoints to your route after the first one
has been added, do the following:
1. Tap the screen to bring up the Main menu.
2. Tap Change route.
3. Tap Travel via.
NOTE: You can also use Voice control to add waypoints.
4. Tap Add.
5. Choose the location for your waypoint from a choice
of Home, Favorite, Address, Recent destination, POI,
latitude/longitude, or position of last stop.
A message tells you where in the list of waypoints the
new one has been inserted.
1
Uconnect® 5.0 63