Ram Trucks 2014 ProMaster Commercial - Uconnect 5.0/5.0N Manual - Manual (Page 21)

• Prior to starting the pairing procedure, ensure all
additional Bluetooth® devices or phones within the
vehicle have their Bluetooth® disabled.
Pairing a Phone
To use the Uconnect® feature, you must first pair your
Bluetooth® phone with the Uconnect® system. Refer to
www.UconnectPhone.com for pairing procedure unique
to your phone.
Start Pairing Procedure
1. Activate the Bluetooth® on your mobile phone.
2. Press the Phone button on the radio faceplate.
3. If no phone is paired with the system, the display
shows a dedicated screen.
4. Touch the Yes soft-key to start the pairing procedure
the search for the Uconnect® device on the mobile
phone (if No is selected, the Phone main screen is
displayed).
5. When prompted by the mobile phone, use its key-
board to enter the PIN code shown on the system
display or confirm on the mobile phone the PIN
displayed.
6. From the Phone screen you can always pair a mobile
phone pressing the Settings button and then touch the
Add Device soft-key and proceed as described above.
7. During the pairing stage a screen is displayed show-
ing the progress of the operation.
20 Uconnect® 5.0