Ram Trucks 2010 3500 - User Guide - Manual (Page 58)

Jacking And Tire Changing Instructions
WARNING!
Carefully follow these tire changing procedures to help prevent personal injury or
damage to your vehicle: Always park on a firm, level surface as far from the edge of
the roadway as possible before raising the vehicle.
• Remove the spare tire, jack and tools from the stored location.
• Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn
while the wheel is still on the ground.
• Assemble the jack and jacking tools. Connect the jack handle driver to the extension,
then to the lug wrench.
• Place the jack:
1500-Series Trucks
• For front wheels, place the scissors jack under the rear portion of the lower control
arm.
WHAT TO DO IN EMERGENCIES
56