Power lumbar, Memory seats, Ventilated seats – Ram Trucks 2010 3500 - User Guide User Manual
Page 16: Getting started

Power Lumbar
• The lumbar controls are located on the
outboard side of the seat cushion. The
lumbar support can be increased by
pressing the front of the switch and
decreased by pressing the back of the
switch.
Memory Seats
• The memory seat feature allows you to save the driver's seat position, driver's outside
mirror position, adjustable brake and accelerator pedals, Automatic Temperature
Control (ATC) temperature setting and radio station preset settings. The driver's
memory buttons are located on the outboard side of the driver's seat cushion.
• Adjust all memory profile settings, press the SET button, then press 1 or 2 within five
seconds.
• To program a Key Fob to the memory position, place the ignition switch in the OFF
position and press and release the LOCK button within 10 seconds on the Key Fob to
be programmed.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key
Fob.
• Refer to the Owner's Manual on the DVD for further details.
Ventilated Seats
• Small fans that draw the air from around the
occupant and exhaust it underneath the
seat and into the passenger compartment
are located in the seat cushion and
seatback. The fans draw this air across the
surface of the seat using air ducts and fine
perforations in the covering to help keep the
driver cooler in higher ambient
temperatures.
• The ventilated seat switches are located in the center instrument panel below the
climate controls. Press the switch once to select High speed. Press the switch a
second time to select Low speed.
GETTING STARTED
14