Casio keyboard PX-320 - Manual (Page 41)

Connecting to a Computer
E-39
• You need to have Adobe Reader or Acrobat Reader
installed on your computer in order to view the contents
of the “CASIO USB MIDI Driver User’s Guide”
(manual_e.pdf). If your computer does not have Adobe
Reader or Acrobat Reader installed already, use the
procedure below to install it.
To install Adobe Reader (Acrobat Reader)
1. Place the CD-ROM that comes with the
digital piano into your computer’s CD-ROM
drive.
2. On the CD-ROM, navigate to the “Adobe”/
“English” folder and double-click
“ar601enu.exe” (or “ar505enu.exe”). Follow
the instructions that appear on your computer
screen to install the driver.
IMPORTANT!
• Adobe Reader cannot be installed using the
“ar601enu.exe” file on a computer running Windows 98.
If your computer is running Windows 98, click
“ar505enu.exe” to install Acrobat Reader.
Minimum Computer System Requirements for
the USB MIDI Driver
z Universal
• Operating System
Windows Vista
TM (32-bit), Windows ® XP
Professional (32-bit), Windows ® XP Home Edition,
Windows ® 2000 Professional, Windows ® Me,
Windows ® 98SE, Windows ® 98
• IBM AT or compatible computer
• USB port that provides normal operation under
Windows
• CD-ROM drive (for installation)
• At least 2MB of free hard disk space (not including
space required for Acrobat Reader)
z Windows Vista, Windows XP
• Pentium 300MHz or higher
• 128MB minimum memory
z Windows 2000
• Pentium 166MHz or higher
• 64MB minimum memory
z Windows Me, Windows 98SE, Windows 98
• Pentium 166MHz or higher
• 32MB minimum memory
Attention Windows Vista users!
• If your computer is running Windows Vista, the
MIDI device selection screen of the MIDI application
software you are using may show a MIDI OUT
device name in the menu of MIDI IN items, or a
MIDI IN device name in the menu of MIDI OUT
items. Note that selecting the wrong type of item for
MIDI IN or MIDI OUT will result in a setup error. If
a setup error occurs, reconfigure the MIDI device
settings, taking care to select the proper items for
MIDI IN and MIDI OUT. For details about
configuring settings, see the user documentation
that comes with your MIDI application software.
Your digital piano has two data communication
modes: a USB mode and a MIDI mode.
The digital piano will enter the USB mode
automatically whenever a connection is established
between it and the USB driver running on a connected
computer. If there is no computer connected to the USB
port, the digital piano will enter the MIDI mode.
z USB Mode
The above message appears for about three seconds
after a USB connection is established. For details about
using the MIDI device functions in the USB mode, see
the “CASIO USB MIDI Driver User’s Guide”
(manual_e.pdf) on the bundled CD-ROM.
z MIDI Mode
The above message appears for about three seconds
after a USB connection terminated. The MIDI mode is
used when sending and receiving data over the digital
piano’s MIDI terminals.
USB Mode and MIDI Mode
USB enabled
USB disabled
PX320_e.book 39 ページ ２００７年８月１日 水曜日 午前９時２８分