Casio keyboard PX-320 - Manual (Page 10)

E-8
Connections
Pedal Connector
You can connect the optionally available 3-Pedal Unit
(SP-30) to the pedal connector on the bottom of the
digital piano. You can then use the pedals for
expression that is similar to that available on an
acoustic piano.
Bottom
NOTE
• The SP-30 Pedal Unit supports half-pedal operation
(pressing the pedal part way), and you can adjust the
amount of the pedal effect applied when the pedal is
pressed part way. See “Other Settings” on page E-32 for
more information.
• The optional CS-65P or CS-66P stand is required in order
to use the SP-30 Pedal Unit.
You can connect audio equipment or a music amplifier
to the digital piano and then play through external
speakers for more powerful volume and better sound
quality.
IMPORTANT!
• The digital piano automatically adjusts sound output to
optimize for headphone output (when headphones are
connected) or built-in speaker output (when headphones
are not connected). This also will cause a change in the
output quality from the digital piano’s LINE OUT R and
L/MONO jacks.
• Whenever connecting something to the digital piano, first
use the VOLUME controller to set the volume to a low
level. After connecting, you can adjust the volume to the
level you want.
• Whenever you connect any device to the digital piano, be
sure to read the user documentation that comes with the
device.
Pedal connector
Connecting Audio Equipment
or an Amplifier
INPUT 1
INPUT 2
Audio amplifier AUX IN jack, etc.
Guitar amplifier, keyboard amplifier, etc.
Pin plug
LEFT
(White)
RIGHT
(Red)
Standard jack
Standard plug
Tape recorder,
MIDI sound
source, etc.
PX320_e.book 8 ページ ２００７年８月１日 水曜日 午前９時２８分