beautypg.com

Casio keyboard PX-320 User Manual

Page 28

background image

E-26

Saving Digital Piano Setups (Registration Memory)

Registration Data Storage Notes

• Registration data is stored even when the digital

piano is turned off.

• Storing new data in an area replaces any data that is

currently in the same area.

• The digital piano is shipped from the factory with

registration data stored in each area. You can restore
this original data by performing the procedure
under “Returning the Digital Piano to Its Factory
Default Settings” on page E-5.

• You can save registration data to an SD memory

card, if you want. See “Using an SD Memory Card”
on page E-41 for more information.

IMPORTANT!

• CASIO COMPUTER CO., LTD. takes no responsibility

for any damages, lost profits, or claims by third parties
arising from the loss of deleted recorded data due to
malfunction, repair, or for any other reason.

1.

On the digital piano, configure the tone,
rhythm, and other settings you want to save
as your setup.

• See “Registration Data Contents” (page E-25) for

more information.

NOTE

• If you use the FUNCTION button to configure a setting,

make sure that the FUNCTION button lamp is unlit
before you advance to step 2. If the lamp is lit, press the
FUNCTION

button so it goes out.

2.

While holding down the STORE button, use
the

T/NO and S/YES buttons to display the

number of the bank where you want to store
the registration data.

• This will display the bank number and then display

the screen for specifying the area number.

Example: Bank 1 selected

3.

While holding down the STORE button, press
one of the area buttons (1 through 12), to
select the area where you want to save the
registration data.

• The lamp of the applicable area button will light after

registration is complete. Also, the message “CPL”
(complete) will appear on the display.

Example: After data has been saved to area 1-2

4.

Release the STORE button.

NOTE

• Registration data cannot be stored when any one of the

following conditions exists. Eliminate the problem
condition and perform the procedure from step 2.
• The digital piano is in the Duet Mode.
• Song, rhythm, or metronome is playing.
• Two RECORDER button lamps are lit or flashing.

To store a setup in registration
memory

PX320_e.book 26 ページ 2007年8月1日 水曜日 午前9時28分