Pro Boat PRB4100 User Manual

Page 5

background image

5



6. Remove the radio box cover from the

hull by lifting it up using the tab at the

rear of the cover.



7. Apply the hook and loop tape to the

bottom of both batteries. Also apply the

mating piece of tape in the hull where the

batteries will be located.



8. Place the motor batteries in the hull.

There will be one battery on the left of the

hull, and one on the right side of the hull.

Note: Center the trims for both the

steering and throttle on your transmitter

before turning the transmitter on.



9. Move the switch on the transmitter to

the ON position and confirm that the red

and green LED illuminate. Turn off the

transmitter.