Pro Boat PRB4075 - Manual (Page 8)

8
 4. Turn on the transmitter, then the ESC
on/off switch. The ESC will beep until you
pull the throttle trigger to full throttle and
return it to the neutral position. Check the
operation of the propeller in relationship
to the throttle trigger. When the trigger
is pulled in, the propeller must rotate
counterclockwise as shown. If the motor
turns in the wrong direction, switch any 2
motor wires.
 5. Check the operation of the steering in
relationship to the steering wheel. When
the wheel is rotated clockwise, the rudder
must move right as shown. If not, follow
the instructions from the radio to set the
servo reversing for the steering.
 6. Place the clear battery cover back into
position. We suggest using clear tape
(PRB0102) around the edge of the main
hatch to keep it in place in the event of a
roll over.