Pro Boat PRB4075 - Manual (Page 4)

4
Required Equipment and Accessories
Transmitter
AA battery (4)
Motor battery (2) (charged)
Hook and loop tape
 1. Locate the pieces for the boat stand.
The longer side pieces will key to the
shorter end pieces. Use a small amount of
Medium CA to glue the pieces together.
Note: Steps 2 through 4 relate only to
the RTR version of the Mystic. Please
refer to the instructions provided with
your particular radio system if assembling
the PNP version of this model.
 2. Slide the cover from the bottom of the
transmitter to access the battery holder.
 3. Install the four AA batteries in the
battery holder. Match the polarity of the
batteries to the molded markings in the
battery holder.
 4. Slide the battery cover back on the
bottom of the transmitter.
Assembly