Pro Boat PRB4000BDC - Manual (Page 3)

3
It is important that you read and follow this
instruction manual, along with the radio
system manual before you run this exciting
boat. Failure to read and understand the
manual could result in personal injury,
property damage or permanent damage to
your boat. It is also important to run your
boat responsibly. With proper care and
maintenance, you will be able to proudly
enjoy your Stiletto for many years to come.
When operating the boat, stay clear of
people, full-scale boats, stationary objects
and wildlife. It is preferable to operate the
Stiletto in low wake, low wind conditions and
in areas free of people, wildlife and objects.
Check all of the hardware, and the propeller,
for damage and loose screws before and after
each run.
If at any time while operating your model
you sense any abnormal function, end your
operation immediately. Do not operate your
boat again until you are certain the problem
has been corrected. Always stay clear of
the propeller.
You will need a 2-channel transmitter.
We recommend one of the crystal-free,
interference-free Spektrum ™ , Pro Boat ® or JR ®
radio systems using DSM marine technology.
Spektrum Marine compatible
transmitters:
• DX3E (SPM3160)
• DX2.0 (SPM20220)
• DX3.0 (SPM20320)
• DX2S (SPM2120)
• DX3S (SPM3140)
• Pro Boat Pistol Grip 2.4GHz (PRB8060)
• Spektrum and JR DSM2
™ aircraft
transmitters
www.spektrumrc.com
• Needle nose pliers
• Marine grease (PRB0100 or PRB0101)
• Paper towel
• Rubbing alcohol
Batteries
In addition, we recommend the purchase of
one of the following batteries:
• PRB3316 7.2V 5100mAh Ni-MH
with Deans Connector
• DYN5351D 7.4V 3200mAh 25C Li-Po
with Deans Connector
• DYN5352D 7.4V 4200mAh 25C Li-Po
with Deans Connector
• DYN5360D 7.4V 5300mAh 25C Li-Po
with Deans Connector
• DYN5361D 7.4V 6000mAh 25C Li-Po
with Deans Connector
www.dynamiterc.com
The Spektrum trademark is used with
permission of Bachmann Industries, Inc.
• Open end wrench: 7mm, 8mm
• Phillips screwdriver: #1
• Hex wrench: 1.5mm, 3mm
• Clear tape (PRB0102)
General Guidelines and Safety Precautions
Recommended Tools and Adhesives
Recommended Radio Equipment and Batteries