Pro Boat PRB3450 - Manual (Page 7)

7
EN
 1. Slide the upper and lower mast halves
together.
 2. Join the two halves using four 2mm x
4mm screws.
 3. Locate the main sail boom and connect
it to the main mast with a screw and nut.
 4. Install the adjust support which
connects the main mast and main sail
boom.
 5. Slide the mast assembly into the fitting
on the top of the hull.
 6. Remove the masthead crane and slide
the unrolled main sail to the bottom of
the mast.
Sail Installation