Charging the receiver battery – Pro Boat PRB3450 User Manual
Page 12
12
EN
1. Use a charger (we recommend the
SPM9526 Spektrum 150mA wall charger)
to charge the receiver battery. Allow
10–12 hours to fully charge the receiver
battery when it is fully discharged.
2. Once the receiver battery is charged,
place it in the boat.
3. Check the switch harness to make sure
it is in the OFF position. Plug the receiver
battery into the switch harness. Make
sure to match the polarity of the plugs so
the black and red wires align with each
other.
4. Replace the hatch cover.
Charging the Receiver Battery
See also other documents in the category Pro Boat Water equipment:
- PRB0300 (14 pages)
- PRB0500 (60 pages)
- PRB0600 (56 pages)
- PRB0650 (56 pages)
- PRB07000 (17 pages)
- PRB08001 (17 pages)
- PRB08007 (16 pages)
- PRB08011 (19 pages)
- PRB08014 (19 pages)
- PRB08016 (15 pages)
- PRB09003 (20 pages)
- PRB2000 (12 pages)
- PRB2000 Addendum (2 pages)
- PRB2050 (11 pages)
- PRB2100 (2 pages)
- PRB2150 (3 pages)
- PRB2200 V.1 (16 pages)
- PRB2200 V.2 (12 pages)
- PRB2250 (12 pages)
- PRB2250 Addendum (1 page)
- PRB2300 (4 pages)
- PRB2350 (20 pages)
- PRB2350S (16 pages)
- PRB2400 (20 pages)
- PRB2450 (20 pages)
- PRB2450S (20 pages)
- PRB2500 (12 pages)
- PRB2550 (20 pages)
- PRB2600 (4 pages)
- PRB2650 (8 pages)
- PRB2700 (16 pages)
- PRB2750 (16 pages)
- PRB2800 (20 pages)
- PRB2800S (44 pages)
- PRB2800T (11 pages)
- PRB2850 (11 pages)
- PRB2850BD (16 pages)
- PRB2900T (16 pages)
- PRB2950 (11 pages)
- PRB3000 Owners Manual (16 pages)
- PRB3000 Quick Start (4 pages)
- PRB3050 (12 pages)
- PRB3050B (18 pages)
- PRB3050S (16 pages)
- PRB3100 (16 pages)